Red Hat Network Satellite Server 6, as well as its upstream project Katello, enables you to easily manage the registered client hosts using Ansible.

Conversely from Puppet, that requires the client to install the agent package and to be registered to the Puppet master running on the Satellite or Capsule, Ansible does not require installing anything client side, since it relies on SSH or, to tell it in Red Hat Network Satellite 6 terms, it relies on remote execution with SSH. The only thing that is required to manage the client hosts of the Satellite using Ansible is enable and configure remote execution and the Ansible plugin on the Satellite itself and on any Capsule you want to use.

This post shows you how to enable both remote execution with SSH and the Ansible plugin on the Satellite. To ensure that everything is properly working, we also run the ansible ping module.

The Linux distribution used in the examples is CentOS 7, but you can of course easily adapt it to any other Red Hat and derived Linux distribution.

If you are interested in the Puppet topic, you may find the post Puppet agent on Red Hat Network Satellite Clients useful.

Prerequisites

The only requisite to go on with this post is having the client already registered on the Red Hat Network Satellite Server 6 or Katello. If you do not know how to do this, or simply want to learn more on this topic, please read Register Clients To Satellite Server 6 Or Katello before going on with this post.

In order to avoid redundancy in writing, I use "on Satellite" every time the described procedure is the same on both Red Hat Network Satellite Server 6 and Katello, otherwise I explicitly specify the procedure necessary on Katello.
As per the best practices, we work using an unprivileged user and we make use of "sudo" only when we need administrative rights. Hammer commands are instead issued using the "katello" user: the rationale is having the environment of this user already setup at login time so that “hammer” uses our Satellite by default.

Required Satellite Plugins

As we told, conversely from Puppet, Ansible does not require having an agent installed on the client hosts: Ansible relies on SSH, and this makes it seen as a remote execution by the Satellite perspective.

So the very first thing to do is enabling the remote execution feature on the Satellite along with the SSH plugin.

Remote Execution With SSH

Please note that this feature is most of the time enabled by default on the Satellite server: it is usually needed enabling it only on the Capsules. As you probably already know, the Satellite is installed and configured using the foreman-installer command line utility.

The options necessary to enable it are:

  • --enable-foreman-plugin-remote-execution
  • --enable-foreman-proxy-plugin-remote-execution-ssh
  • --foreman-proxy-plugin-remote-execution-ssh-install-key=true

Please note that the SSH connections to the remote client hosts perform the authentication using the private key of the foreman-proxy user: this key gets generated during the installation of the SSH plugin beneath the "/usr/share/foreman-proxy/.ssh" directory.

Be wary that on some versions of the Satellite this path is a symbolic link to the "/var/lib/foreman-proxy/ssh" directory.

The Ansible Plugin

This feature too is most of the times enabled by default on the Satellite server: it is usually needed enabling it only on capsules.

The foreman-installer options necessary to enable it are:

  • --enable-foreman-plugin-ansible
  • --enable-foreman-proxy-plugin-ansible

Please note that since Ansible relies on SSH, as we already saw it is mandatory to configure the Remote Execution SSH plugin first so to leverage on its configuration when connecting to the target client hosts.

Installing The Plugins

Login to the Satellite or the Capsules where there plugins are not already enabled and type the following command:

sudo foreman-installer \
--enable-foreman-plugin-{remote-execution,ansible} \
--enable-foreman-proxy-plugin-{remote-execution-ssh,ansible} \
--foreman-proxy-plugin-remote-execution-ssh-install-key=true

the Satellite/Capsule configuration (or reconfiguration) starts as follows:

Installing             Package[ca-certificates]                           [13%] [.........         ]

in the end you should get something like in the following snippet:

Installing             Done                                               [100%] [...........................................................................]
  Success!
  * Katello is running at https://sat-ci-up3a002.mgmt.carcano.local
  * To install an additional Foreman proxy on separate machine continue by running:

      foreman-proxy-certs-generate --foreman-proxy-fqdn "$FOREMAN_PROXY" --certs-tar "/root/$FOREMAN_PROXY-certs.tar"
  The full log is at /var/log/foreman-installer/katello.log
If the Satellite for any reason has not them already enabled, you must run the above command on the Satellite itself.

Grant SSH Login To The Clients

Since when performing remote executions the Satellite by default connects to the client hosts as the root user, the Ansible plugin behaves the same way too. This means that to get access to the clients, it is enough to install on the client hosts the public key of the foreman-proxy user of the Satellite among the authorized keys of the root user.

Login to the client host and switch to the root user:

sudo su -

create the ".ssh" directory (if it does not already exist):

[ -d .ssh ] || mkdir -m 700 .ssh

fetch the public key of the foreman-proxy user from the Satellite, and append it to the the ".ssh/authorized_keys" file:

curl https://sat-ci-up3a002.mgmt.carcano.local:9090/ssh/pubkey >> ~/.ssh/authorized_keys

if the authorized_key file was not existent and  it has just been created, fix its permissions as follows:

chmod 0600 ~/.ssh/authorized_keys

Testing The Whole Setup

Although this is an optional step, it is always wise to immediately test that everything is properly setup.

Login to the Satellite and switch to the foreman-proxy user - note how we need to spawn the shell since the user default shell is the "no-login":

sudo -u foreman-proxy -s /bin/bash

we want to run an Ansible ad hoc command to ensure that the client host can actually be accessed: since this requires an Ansible inventory, we create a temporary one containing just the client host on which we have just authorized the SSH key of the foreman-proxy user to login as root:

cat << EOF > /tmp/inventory
srv-ci-up3a002.mgmt.carcano.local
EOF

we can now have a go with Ansible, typing any ad-hoc command we wish: to test the configuration, the ping module is more than enough:

ansible -i /tmp/inventory -u root --private-key ~/.ssh/id_rsa_foreman_proxy all -m ping

the output must be as follows:

srv-ci-up3a002.mgmt.carcano.local | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    }, 
    "changed": false, 
    "ping": "pong"
}

this outcome means not only that the client host is reachable, but also that we succeeded in SSH logging in.

Ansible - Acquainting To It

Now we have the Satellite properly setup to use Ansible, but we are still missing the Ansible code to run on it. Before showing you how to import Ansible roles, I think that we must have a quick walk-through of the Ansible terms just to avoid confusion.

Playbook

Ansible can play a list of "tasks" that are specified into a manifest file called playbook: it can also contain "handlers", that are special tasks that run only at a specific moment of the play and only if they have been notified. Each task describes how to invoke an Ansible "module" (that is Python code), passing the necessary parameters to it.

It happens very often that among the various tasks there are some that make use of Ansible modules that copy files from the filesystem to the managed client hosts: these files can also be JINJA templates that are rendered only when generating the actual file on the managed client host.

Role

Ansible promotes code re-usability by the means of the so called roles: they provide a convenient way to bundle tasks files, handlers, resource files, templates and even custom modules within a single delivery unit that can be imported by a playbook, or even by another role.

Red Hat System Roles

Red Hat packaged the rhel-system-roles RPM with a set of Ansible roles specifically developed by Red Hat to configure its systems.

We can easily install them as follows on the Satellite (or either on any Capsule, if necessary)

sudo yum install rhel-system-roles

they are installed into "/usr/share/ansible/roles" directory, so we can easily list them as follows:

ls /usr/share/ansible/roles

Job Templates

Satellite lets define Job Templates: these are Embedded Ruby (ERB) template files that are processed to generate a "Job" containing with the actual logic to run. This enables you to derive from a Job Template almost any kind of statement files, such as shell scripts or even Ansible playbooks indeed: it is the Satellite that takes care of generating and running the resulting statement file on the client hosts.

They are a very handy and powerful tool, since we can even define input parameters such as textboxes, drop-downs, checkboxes and such: they are rendered by the Satellite Web UI while their values are stored within ERB variables.

When connected to the Satellite Web UI as a user with administrative, we can can easily list the existing Job Templates of the currently selected Organization by clicking onto:

  • "Hosts"
  • "Job Templates"

as shown by the screenshot on the right.

The Satellite provides a small set of pre-configured Job Templates for common tasks such as installing RPM packages or errata, puppet modules, enabling or disabling services and so on.

Generating An Ansible Playbook From A Job Template

It has come the time to show you  how it is easy to create a very simple Job Template that generates and run an Ansible playbook with the following contents:

---
- hosts: all
  tasks:
    - name: ping the host
      ping: {}

this very simple playbook specifies a single play of one task only, that runs the Ansible ping module. The purpose of this module, as we already saw, is to perform a "SSH ping" that does not check only the reachability of the targets at the networking level, but also attempts an SSH login.

Please note how this playbook has been coded so to run on every hosts of the Ansible inventory (line 1): when dealing with Satellite, you must always specify "all" as target, since it is the Satellite itself that takes care to limit the execution of the playbook only to the selected host(s) mimicking the --limit clause of Ansible.

So let's start the creation of the new Job Template by clicking on the "New Job Template" button and filling in the form as depicted by the following screenshot:

we:

  • assign "Ansible Ping" as name of the Job Template
  • select the "yaml" code syntax-highlighting - this is not mandatory, it but can be convenient when dealing with playbooks more complex than this
  • type the actual YAML code of the playbook into the textbox

We must now classify the Job Template we are creating: switch to the "Job" tab and fill it as by the following screenshot:

Since it is a Playbook, we assign it to the Ansible Playbook job category, and we specify "Ansible" as the provider.

We are finished: just click on "Submit" to save the Job Template.

Running A Job Template On A Client Host

It has come the time to run the "Ansible Ping" job template we just created on a client host: within the Satellite Web UI,  switch to the "All Hosts" listing page as follows:

  • "Hosts"
  • "All Hosts"

This page lists every client host you have registered on the Satellite providing an overview of the installed operating system, the host group they belong to, the Puppet Environment and the last time the client host has submitted a report with its facts.

If you have many hosts, it is convenient to learn how to filter them so to get a shorter list: you can even select just one client host, as by shown in the following screenshot:

click on the host FQDN - in this example I click on "srv-ci-up3a002.mgmt.carcano.local": a page like the following thumbnails is shown:

as you see it  provides a summary of some of the most interesting collected metrics along with several buttons to perform actions on this client host.

Click on the "Schedule Remote Job" button:

Select the category "Ansible Playbook" so to get listed only the Job Templates that belongs to it, then pick "Ansible Ping" and click on "Submit" to schedule the job for immediate execution.

The job is queued, started. The following screenshot show the outcome of a successfully terminated job:  

you may want to see the console output: you have just to click on the FQDN - in this case "srv-ci-up3a002.mgmt.carcano.local".

This is the output of a successful execution of the playbook generated by the "Ansible Ping" Job Template.

Import Ansible Roles On The Satellite

Playbooks alone are suitable for quite trivial needs: when you have to deal with complex scenarios, it is mandatory to use Ansible roles in your playbooks. The Satellite can handle roles too, provided that you import them first from the filesystem of the Satellite or of a Capsule.

By using the Satellite Web UI as a user with administrative rights, we can easily list the Ansible roles that are available for the selected Organization - simply  click onto:

  • "Configure"
  • "Roles"

If you prefer to use the hammer command line utility, you must perform a SSH login to the Satellite and switch to the user you specifically created to work with this tool so not to have to manually provide the mandatory settings that are specific to your environment. In this post the user is "katello", so let's switch to it:

su - katello

then type:

hammer ansible roles list --organization "Carcano CH"  

in both ways the outcome is the list of already imported roles.

If you are using the Web UI, and you have not imported any role yet, you get the following message:

Click on the "Import from ..." button with the name of the Satellite (or of the Capsule) you want to import the roles from. Clicking the button causes the Satellite to create a list with every Ansible role found beneath the "/usr/share/ansible/roles'' path of the Satellite (or of the Capsule).

The outcome is as follows:

a list of the roles available on the proxy is shown: pick the ones you are interested into (of course you can select them all) and click on the "Update" button - in this example as you see we are importing only "linux-system-roles.certificate" and "linux-system-roles.network".

Once imported, the list looks like as follows:

Import Ansible Variables On The Satellite

Ansible Roles are configured using variables: this means that we still need to import the Ansible variables that are necessary to configure the role we imported. This can be easily accomplished using the Web UI:

click on

  • "Configure"
  • "Variables"

If you prefer to use the hammer command line utility, as the user you specifically created to work with this tool, simply type:

hammer ansible variables list --organization "Carcano CH"  

in both ways the outcome is the list of already imported variables.

If you are using the web UI, and you have not imported any variable yet, you get the following message:

click on the "Import from ..." button with the name of the Satellite or Capsule you want to import the variables from: they are guessed from the variables defined in the "defaults/main.yml" file of each of the already imported roles.

as you see I'm importing them all, but you can of course import only a  subset of the list.

Just click on "Update" to complete the import.

Once imported, the variables are shown as by the following screenshot:

 

We are now ready to use Ansible to manage the client hosts of the Satellite: we can either directly assign Ansible roles to host groups or create Job Templates that exploit them. 

Thoroughly explaining this topic certainly deserves a whole post, ... so, if you want to know more on this topic too, don't miss Managing Red Hat Network Satellie Clients With Ansible Roles And Playbooks.

Footnotes

Here it ends this tutorial on enabling and configuring Ansible on Red Hat Network Satellite Server or Katello. We saw how to enable the necessary plugin and how to authorize the access to a client host, testing the setup with the Ansible ping module. I hope you enjoyed it.

I hate blogs with pop-ups, ads and all the (even worse) other stuff that distracts from the topics you're reading and violates your privacy. I want to offer my readers the best experience possible for free, ... but please be wary that for me it's not really free: on top of the raw costs of running the blog, I usually spend on average 50-60 hours writing each post. I offer all this for free because I think it's nice to help people, but if you think something in this blog has helped you professionally and you want to give concrete support, your contribution is very much appreciated: you can just use the above button.

4 thoughts on “Enable And Configure Ansible On Red Hat Network Satellite

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>